The lightest and strongest portable vehicle mounted arm available.

With balanced aerodynamics and a self-locking swing-axis, ULTRA holds position even at high speeds and during aggressive cornering. Our team creates dynamic shots with the confidence that we’re in control of the arm and not the other way around. ULTRA’s 12’/3.65m reach moves the camera smoothly, right where you want it, while programmable limits provide safe end points for the swing and lift axises.

Strong & Light

Made from 6061 and machined aluminum, the ULTRA can support camera packages up to 55lbs at 12 feet of reach (16’ over all) or 110lbs at 8’. Unloaded, ULTRA only weighs 160lbs.

Precise & Powerful

American made high-power brushless motors are make ULTRA nimble and responsive. ULTRA also has internal IMUs for gyro stabilization/auto leveling over uneven terrain.

Compact & Ready to Travel

Ultra packs down in to 5 cases which are able to be checked on most airlines.

Mounts to Almost Anything

When traveling, a vehicle can be rented and turned in to a camera car in under an hour. Mount Ultra to the picture car for the ultimate selfie stick.

Motocrane Ultra Specs

GENERAL

Boom Length | 12ft/3.65m reach from fulcrum

Max Payload | 55lbs/25kg

Recommended Heads | Movi XL + Pro, Shotover G1, Arri SRH-3, DJI Ronin 2, Flighthead Mini (Any mitchell mount)

Construction | 6061-T6, 7075-T6 Aluminum Alloy, Stainless Steel, Carbon Fiber


WORKING PERFORMANCE

Max Wind Speed | 100 MPH (arm forward or aft) 75+ MPH 360º rotation

Max Acceleration | 1g lateral, longitudinal

Max Controlled Speeds | 7 sec 360º Swing, 3 Sec 90ª deg Lift

Operating Temp | MIN: -30ºF/ -34ºC, MAX: 110ºF/ 43ºC

Motor Torque | Tilt axis, 1050ft-lbs peak torque, Swing axis 420ft-lbs peak torque

Passive Arm Dampening | 14″ Z-Axis, 45º Pitch and Roll Dampening (Adjustable dampening)

Weather Rating | Water Resistant (IP65)


RIGGING/MOUNTING

Base Mounting | x4 TÜV-Certified 500kg 2-inch Speed rail clamp

Head Mounting | Mitchell Mount, + Universal Bolt Patterns

Suction Speed Rail Kit | (For use on picture vehicles) Flat, glossy 8″ mounting points for vacuum cups (non-fabric, non-glass)


MECHANICAL

Range of Motion | Unlimited Swing (Pan) Rotation, 35º Lift (Tilt) Up and Down

System Weight | 190 lbs unloaded, 370 lbs fully loaded (including max payload)

Boom | 30 lbs unloaded weight


ELECTRICAL

Video Signal | Wired 3G-SDI thru Swing Axis (Infinite rotation)

Power Source | 48V 60A Battery (not included), 12V Integrator (TBD), V-Lock (TBD)

Power Consumption | 2500W Peak, 300W nominal (Depends on duty)

Intra-Module Connectors | Amphenol IP68 Twist Lock

Internal System Voltage | 48V nom (45-60V)

Certifications | CE, RoHS

  • 1-702-769-2892